Overview
AISRY ASR-5625 wire swing tester is a device specially used to test the flexural strength of plug leads and cables. The test method is to fix the test material on the fixture and apply a certain load, swing it left and right through the fixture, and check the disconnection rate after a certain number of times or the total number of swings when it cannot be powered on. The machine can automatically count and automatically stop working when the broken wire cannot be powered on. It is suitable for manufacturers and Quality control departments to perform bending tests on power cords and DC wires.
Features
1. Equipped with 6 sets of fixtures, multiple sets of tests can be performed simultaneously.
2. The swing angle can be adjusted between 45 °, 60 °, 90 °, and 180 °.
3. The swing speed is adjustable from 10-60c.p.m., and the photoelectric Sensor is used to collect the signal and read it directly through the digital display table, and the stepless governor can be adjusted.
4. Equipped with 6 automatic counters, each group of tests can be individually counted.
5. A variety of loads can be applied: 50g, 100g, 200g, 300g, 500g.
6. Equipped with an automatic stop function, it automatically stops working when the sample is bent until it is disconnected and cannot be powered on.
Principle
The machine drives the jig to swing left and right by fixing the sample on the jig and applying the specified load. During the swing process, the equipment automatically records the number of swings. When the sample is broken due to bending and cannot be powered on, the equipment can automatically detect and stop working to test the bending strength and life of the wire.
Applications
Power cord manufacturers, DC line manufacturers, product mass testing department
Steps
1. Fix the sample on the corresponding fixture.
According to the test requirements, add the specified load (50g, 100g, 200g, 300g or 500g) to the sample.
3. Adjust the device to the required swing angle (45 °, 60 °, 90 °, or 180 °).
4. Adjust and set the required swing speed (10-60 c.p.m.) by stepless governor.
5. Start the device to start the test, and the automatic counter starts to record the number of swings of each group separately.
6. After the test reaches the set number of times, stop to check the disconnection rate, or wait for the equipment to automatically stop when the sample is disconnected and cannot be powered on, and then check the total number of swings.
Notice
• Power supply voltage of the equipment is 220V, 3A, please make sure the power supply matches.
Before operation, make sure that the sample is firmly fixed on the fixture and the load is applied correctly.
• When adjusting the swing angle and speed, it needs to be carried out in the static state of the equipment.
• During the test, please pay attention to the running status of the equipment and the counter display.
Equipment weight is 80kg, handling and installation should pay attention to safety.
Do not load or unload samples or adjust parameters while the equipment is running.
• Maintain equipment regularly to ensure that components such as Photoelectric Sensors are clean and functional.