Overview
The ASR-1220S vertical plug-in life tester is suitable for testing the insertion force, pull-out force, plug-in life, single PIN and plastic retention force, forward force of various connectors, as well as general compression and tensile failure strength tests. The device adopts the Chinese operation interface of Windows Windows and is equipped with an automatic centering device to ensure accurate testing, and can store complete test data and Linear dispersion. Optional dynamic impedance test system can realize simultaneous testing of plug-in force and dynamic impedance.
Features
1. Equipped with automatic centering device to ensure that the male and female connectors are automatically focused, and the test is accurate without deviation.
2. Using the Chinese operation interface of Windows window, the setting is simple, and the data can be fully stored (including test conditions, displacement, Linear dispersion diagram, life Linear dispersion diagram, inspection report, etc.).
3. It can be equipped with a dynamic impedance test system (optional) to draw the load stroke-impedance Linear dispersion diagram while testing the insertion force.
4. Adopt Japanese Panasonic servo motor and ball screw drive mechanism to ensure smooth and accurate operation.
5. With multi-axis movement function (X/Y axis), the test range is flexible.
6. One machine is multi-purpose, capable of completing various test items such as insertion and extraction force, holding force, compression and stretching.
Principle
The testing machine drives the ball screw through the servo motor, drives the test head to perform precise displacement movement, and executes the insertion or extraction action of the connector. The built-in force Sensor detects and records the force value change during the process in real time, so as to obtain data such as the insertion force Linear dispersion. The matching automatic centering device can ensure that the connector is aligned during the test to avoid uneven force. If the impedance test system is selected, the contact impedance change of the connector during the insertion and removal process can be monitored synchronously.
Applications
Connector single hole insertion and unplugging test, connector whole row insertion and unplugging test, connector insertion and unplugging life test, connector single PIN and plastic holding force test, connector forward force test, general compression and tensile failure test
Standards
The information does not mention
Steps
1. Install the connector to be tested on the fixture and use the device's X/Y axis movement function for initial positioning.
2. Set test conditions through the Windows Chinese operation interface, such as test speed, stroke, number of cycles, etc.
3. Start the automatic centering device to accurately align the male and female connectors.
4. Start the test, and the device automatically performs plugging and unplugging or compression/stretching actions.
5. During the test, the system collects and displays data such as force value and displacement Linear dispersion in real time.
6. After the test is completed, the system automatically saves all test data, Linear dispersion charts and reports.
Notice
* Power supply voltage is 220V/50Hz and meets equipment requirements.
The maximum measured load of the equipment is 50Kg, 20Kg, 5Kg and other specifications. Please pay attention to the selected range when using it.
Before testing, make sure that the connector fixture is firmly installed and use an automatic centering device to ensure accurate alignment.
During the operation of the equipment, do not touch moving parts.
Regularly maintain the transmission mechanism (e.g. ball screw) to ensure smooth operation.
The dynamic impedance test function is optional. If you need to use it, please confirm that it is equipped with the corresponding system.
