Overview
PRBSHDD is a Defelsko brand Shore Shore Durometer D-type probe. Measurement range is 0~ 100HD, Measurement accuracy is +/- 1HD, resolution is 0.1HD. The probe is suitable for measurement of hard rubber, epoxy resin, hard plastic, PVC, acrylic and other materials Hardness.
Features
1. Measurement range, covering 0~ 100HD.
2. Measurement accuracy is high, the error is +/- 1HD.
3. Fine resolution, up to 0.1HD.
4. Suitable for a variety of hard materials.
Principle
The probe measures the depth at which a shaped pin is pressed into the material under standard spring pressure and converts it to a Shore Hardness value.
Applications
Rigid rubber, epoxy resin, rigid plastic, PVC, acrylic
Standards
ASTM D2240、ISO 868/7267/7619、DIN 53505
Steps
1. Install the probe on the corresponding Shore Shore Durometer host.
2. Ensure that the surface of the tested sample is flat and clean.
3. Press the probe vertically towards the surface of the sample to be tested until it is in full contact.
4. Read and record the Shore D Hardness value displayed by the hardness gauge.
Notice
• Make sure the probe matches the host model before use.
• Keep the probe perpendicular to the measured surface during measurement.
• Film thickness and flatness should be sufficient.
• Avoid use in extreme temperature or humidity environments.
Periodically calibrated to ensure measurement accuracy.
