Overview
ZB-HY5000 paper tube flat compression strength tester is a special instrument for measuring the flat compression strength of paper tubes (outer diameter less than 200mm), and can also be used to measure paper ring compression strength, Corrugated Board edge compression strength, flat compression strength, adhesive strength and corrugated base paper flat compression strength. The instrument is a mechatronic structure, adopts modern mechanical design concepts and microcomputer processing technology, and has the characteristics of fixed upper platen design, high Measurement accuracy, powerful data processing function, convenient operation and stable performance.
Features
1. Mechatronics design, compact structure, Appearance is beautiful and easy to maintain.
2. Using the upper platen fixed type, Measurement accuracy is high.
3. It has powerful data processing function, which can directly obtain the statistical results of various data and automatically reset.
4. Large-screen color touchscreen, easy to operate.
5. Users can book the corresponding accessories separately according to their needs to realize various strength tests of base paper and Corrugated Board.
6. It has the function of statistical processing of test data and can be printed out.
Principle
The instrument applies pressure to the sample by driving the upper pressure plate through the mechatronics structure, uses the microcomputer processing technology to precisely control the pressing speed and collect the force value data in real time, and finally calculates the performance indicators such as the flat compression strength of the sample.
Applications
Paper tube compressive strength measurement, paper ring compressive strength measurement, Corrugated Board edge compressive strength measurement, Corrugated Board compressive strength measurement, Corrugated Board adhesive strength measurement, corrugated base paper compressive strength measurement
Standards
ISO 12192、ISO 3070、ISO 7263、ISO 3035、GB/T 2679.8、GB/T 6546、GB/T 6548、GB/T 2679.6、GB/T 22874
Steps
1. According to the test requirements, install the corresponding auxiliary equipment (e.g. ring pressure test center plate, side pressure sample Sampler, etc.).
2, the preparation of samples that meet the requirements of the standard.
3. Place the specimen in the correct position on the lower platen of the instrument.
4. Set the test parameters through the touchscreen (e.g. the recommended test speed is 60mm/min).
5. Start the test, and the instrument automatically pressurizes and records data.
6. After the test is completed, the instrument is automatically reset, and the screen displays the statistical results directly.
7. You can choose to print out the test report.
Notice
* Power supply voltage must be AC220V +/- 10%, 50HZ.
Force values range from 50 to 5000N.
The recommended test speed is 60mm/min, and the pressurization speed can be adjusted within the range of 0 to 100mm/min.
The parallelism of the upper and lower pressure plates should be less than 0.05mm.
The working stroke is 200mm.
* Indication Error +/- 1%, indication variability ≤ 1%.
* Net weight of the instrument is 50kg, which should be paid attention to during handling and installation.
Users need to choose the corresponding special accessories according to the actual test items.
