Please contact customer service
Measurement range 50~ 1600kPa, sampling frequency 400 times/second, using all-steel chain drive to prevent compression deviation, equipped with three-dimensional semicircular full window observation window and protective cover safety device.
Category : Burst Strength Tester
Brand : PuYun
SKU : NB033484
Service :The delivery and service By NBCLab.Com
Computer paper bursting strength tester (model: PY-H602), also known as bursting strength tester, is a professional instrument produced by PUYUN for testing paper bursting strength and bursting index. The instrument is suitable for the detection of various paper materials such as cardboard, kraft paper, cardboard, corrugated paper, gray board paper.
1. Measurement range, 50~ 1600kpa, resolution of 0.01kpa. 2. Adopt all-steel chain drive structure to prevent compression deviation and improve detection stability. 3. Equipped with a three-dimensional semi-circular full-window observation window and a protective cover safety device, the deformation monitoring chord length is 41mm. 4. The test head supports 360 ° free orientation positioning and clamping. 5. The circuit board chip comes with a water vapor filtrating device to protect the circuit stability. 6. Adopt fully enclosed solid state power supply and fully enclosed hydraulic system, anti-loss and anti-collision, Stability is high. 7. The wings of the fuselage are reinforced with thickened steel plates to prevent the fixture from shifting and deforming during testing. 8. Equipped with a 7-inch LCD screen, which displays data in real time. The replacement film is controlled by a separate three-station program (cylinder program, pressure control, and pressure withdrawal control interface), which is easy to operate. 9. The clamping force range is 100 to 1200Kpa, and the support unit (Kg/cm2, kpa, lbf/in2) and language (Chinese and English) can be freely switched. 10. Integrated modular integrated thermal printer, which can directly output test results.
The instrument applies uniformly increasing pressure to the specimen clamped between the upper and lower pressure plates (upper plate diameter 30.5 +/- 0.1mm, lower plate diameter 33.1 +/- 0.1mm) at a constant oil feeding speed (95 +/- 5mL/min) through a hydraulic system. When the specimen breaks, the system records the maximum pressure value, i.e. burst resistance. The instrument uses a High Accuracy Sensor (sampling frequency 400 times/second) and a data analytics system to ensure the accuracy of the measurement results.
Testing of Burst Resistance Strength and Burst Resistance Index of Cardboard, Kraft Paper, Cardboard, Corrugated Paper, Greyboard Paper
GB/T 454 Paper Burst Resistance Measurement, QB/T 1057 Paper and Cardboard Burst Resistance Measurement, ISO 2758 Paper Burst Resistance Measurement
1. Prepare the specimen and ensure that the instrument is in a horizontal and stable state. 2. Turn on the power and set the language and unit through the display screen as needed. 3. Place the specimen evenly on the lower platen. 4. By controlling the interface operation, the upper pressure plate is lowered and the sample is clamped to ensure that the clamping force is within the specified range. 5. Start the test at the pressurization control interface, and the instrument automatically pressurizes until the sample breaks. 6. After the test is completed, the instrument automatically decompresses and raises the upper pressure plate. 7. Read the test data on the display screen or print it through a thermal printer. 8. If you need to replace the film, you can switch to a special replacement program interface for operation.
* The instrument needs to work in an environment with temperature (20 +/- 10) ° C and humidity < 85%. Before use, ensure that the concentricity of the upper and lower pressure plates meets the requirements (≤ 0.25mm), and the film resistance is within the specified range. When clamping the sample, it should be flat to avoid wrinkles to ensure the accuracy of the test. * When replacing the film or performing maintenance, please strictly follow the guidelines on the three-station program interface. * The instrument gas source needs to be provided by the customer. * Periodically calibrate the instrument using the included correction plate. Please pay attention to the protective cover during operation to ensure safety. * The instrument weight is about 55Kg, so pay attention to safety when moving or installing.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
