Overview
The US RDS 17 #3/8 "Spreader scraping rod adopts a formed process, the film thickness is 118.9μm, the rod diameter is 9.5mm, the total length of the rod is 40cm, the effective application width is 30cm, no matching handle is required, and there are 5cm lengths of hand-held parts at both ends. RDS17 coating rod is suitable for coatings, plastics, Adhesives, additives, Gloss oil, inks, paints, polymer materials and other films.
Features
1. Adopt formed production process
2. No matching handle is required, and there are 5cm grip parts at both ends
3. Made of stainless steel
4. The film thickness is precisely 118.9μm
5. Effective application width up to 30cm
Principle
A uniform film is formed on the surface of the substrate by a formed process, and a standard wet film thickness Spreader of 118.9 μm is achieved by precise rod structure and thickness control.
Applications
Coatings, Plastics, Adhesives, Additives, Gloss oils, inks, paints, Polymer materials
Steps
1. Directly hold the 5cm part at both ends of the rod body
2. Scratch on the surface of the substrate to be Spreader
3. Complete the film preparatory
Notice
• No matching handle is required.
• Pay attention to keep the coating rod clean
• Make sure the surface of the Spreader is flat when using
