Overview
Japan OSP-25 L2000φ 16 formed wire scraper rod (also known as Metering rod) is a custom production line rod used to control flow and maintain coating uniformity in paper, film and other production equipment. It is made of stainless steel, with rust resistance and Abrasion Resistance. It is an imported product from Japan with a rod diameter of 16mm, a Spreader width of 2000mm, and a control Coating thickness of 25 microns.
Features
1. Made of stainless steel to prevent rust and Abrasion Resistance.
2. As a D-Bar series product, it can replace traditional steel wire scrapers, solving the problems of loose wire, broken wire, easy to clean, easy to block, and unable to freely change the surface shape.
3. D-Bar series can control the minimum 1.5μm wet film thickness to achieve ultra-thin Spreader.
4. The bottom of the groove is wider than the traditional wire scraper, and the amount of Spreader is usually larger.
5. Specifications and lengths can be customized.
Principle
Spreader liquid on the substrate surface, using D-Bar to adjust (scrape off) the amount of liquid, thereby controlling the Coating thickness and uniformity.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Steps
1. Spreader liquid on the surface of the substrate.
2. Use the D-Bar to adjust (scrape off) the amount of liquid.
Notice
• Before use, please confirm whether the product specifications (such as wet film thickness, total length, effective Spreader width, rod diameter, etc.) meet your process requirements.
• This product is a customized wire rod, and the specific specification and length need to be consulted by customer service.
• Please pay attention to the difference in the amount of Spreader between the D-Bar and the traditional wire scraper.
