Overview
Japan OSP-47 L2000φ 16 formed wire scraper rod (also known as Metering rod) is a custom production line rod used to control flow and maintain coating uniformity in paper, film and other production equipment. It is made of stainless steel and has the characteristics of rust prevention and wear resistance. The product is imported from Japan OSP with a rod diameter of 16mm, a Spreader width of 2000mm, and a control Coating thickness of 47 microns.
Features
1. Made of stainless steel, rust-proof and Abrasion Resistance is better.
2. For the formed process wire rod, the length of the specification can be customized.
3. Compared with traditional steel wire scrapers, it solves the problems of loose wire, broken wire, difficult cleaning, easy blockage, and the inability to freely change the surface shape.
4. The bottom of the groove is wider than the traditional wire scraper, and the amount of Spreader is usually larger.
5. Minimum 1.5μm wet film thickness can be controlled to achieve ultra-thin Spreader.
Principle
Spreader liquid on the substrate surface, using the D-Bar bar to adjust (scrape off) the amount of liquid, thereby controlling the Coating thickness and maintaining uniformity.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Steps
1. Spreader liquid on the substrate surface.
2. Scrape the Spreader area with a D-Bar bar, adjust and scrape off excess liquid to control the Coating thickness.
Notice
• This product is a customized wire rod, and the specific specification and length need to be confirmed by consulting customer service.
• When using and cleaning, be careful to avoid damaging the surface of the wire rod.
• Please select the appropriate operating parameters according to the specific Spreader liquid and substrate characteristics.
