Overview
Japanese OSP-50 micron production rod (also known as Metering rod) is a custom production line rod used to control flow and maintain coating uniformity in paper, film and other production machinery and equipment. It adopts formed process and stainless steel material, and has anti-rust and Abrasion Resistance. OSP-50 L2000φ 16 production rod is a custom rod with a rod diameter of 16mm, a Spreader width of 2000mm, and a control Coating thickness of 50 microns. It is an original imported product from Japan OSP.
Features
1. Made of stainless steel to prevent rust and Abrasion Resistance.
2. formed process production, custom bar.
3. Imported from Japan OSP.
4. Compared with traditional steel wire scrapers, the D-Bar series solves the problems of loose wire, broken wire, easy to clean, easy to block, and unable to freely change the surface shape.
5. D-Bar can perform ultra-thin Spreader, and can control the minimum wet film thickness of 1.5μm.
6. The bottom of the groove of the D-Bar is wider than that of the traditional wire scraper, and the amount of Spreader is usually larger.
Principle
Spreader the liquid on the surface of the substrate, with D-Bar to adjust (scrape off) the amount of liquid to control the flow and maintain coating uniformity.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Steps
1. Spreader the liquid on the surface of the substrate.
2. Scrape the Spreader area with a D-Bar bar and adjust (scrape off) excess liquid to control Coating thickness and uniformity.
Notice
• This product is a customized wire rod, and the specification and length can be customized. For specific details, please consult customer service.
• Before use, please confirm whether the product specifications (e.g. wet film thickness, Spreader width, rod diameter) meet your process requirements.
• Please pay attention to the difference in the amount of Spreader between the D-Bar and the traditional wire scraper.
• Please perform proper maintenance and cleaning according to the material of the product (304 stainless steel, chrome-plated surface).
