Overview
Japan OSP-120 L2000φ 16 is a production-type formed steel wire scraping rod (Metering rod), specially designed for paper, film and other production equipment, used to precisely control the flow rate of Spreader and maintain coating uniformity. The product is made of 304 stainless steel, which has anti-rust and wear resistance. The rod diameter is 16mm, the width of Spreader is 2000mm, and the controllable Coating thickness is 120 microns. It is the original imported product of Japan OSP.
Features
1. Made of 304 stainless steel, it has better rust resistance and Abrasion Resistance.
2. formed process production, stable structure.
3. Coating thickness can be precisely controlled (120 microns).
4. Spreader width is large (2000mm).
5. As a D-Bar series product, compared with traditional steel wire scrapers, it solves the problems of loose wire, broken wire, difficult to clean, easy to clog, and the inability to freely change the surface shape.
6. The D-Bar groove is wider at the bottom, usually providing a larger amount of Spreader.
Principle
Spreader liquid on the surface of the substrate, by using a D-Bar wire rod scraping coating, to adjust (scrape off) the amount of excess liquid, so as to precisely control the wet film thickness left on the substrate, to achieve uniform Spreader.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Standards
Japan OSP original imported products
Steps
1. Install the cable rod in the corresponding position of the Spreader device.
2. Spreader the liquid on the surface of the substrate.
3. Use a D-Bar wire rod to scrape the coating, adjust and scrape off excess liquid to control the wet film thickness.
Notice
• Please select the appropriate rod specification (wet film thickness, Spreader width, etc.) according to the specific Spreader needs.
• It should be cleaned in time after use to prevent blockage.
• When customizing the length of different specifications, please consult the relevant customer service personnel.
