Overview
Japan OSP-120 L1000φ 16 is an original imported production type Metering rod. It adopts formed process and stainless steel material to control the flow and uniformity of coatings in paper, film and other production equipment. The product has a rod diameter of 16mm, a Spreader width of 1000mm, and can control the Coating thickness of 120 microns.
Features
1. Made of stainless steel, rust-proof and Abrasion Resistance is better.
2. For the formed process wire rod, the length of the specification can be customized.
3. Compared with the traditional steel wire scraper, it solves the problems of loose steel wire, broken wire, easy to clean, easy to block, and unable to freely change the surface shape.
4. D-Bar series products have a wider groove bottom, a larger amount of Spreader, and can control the minimum 1.5μm wet film thickness to achieve ultra-thin Spreader.
Principle
Spreader liquid on the surface of the substrate, use the D-Bar bar to adjust (scrape off) the amount of liquid, thereby controlling the Coating thickness and maintaining uniformity.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Standards
Japan OSP original imported products
Steps
1. Spreader liquid on the substrate surface.
2. Use a D-Bar bar to scrape the coating surface, adjust and scrape off excess liquid to control Coating thickness and uniformity.
Notice
• The product is a customized specification, and the specific length and other parameters need to be confirmed by consulting customer service.
• Before use, please confirm whether the product specifications (e.g. wet film thickness, Spreader width, rod diameter) meet your process requirements.
• Please pay attention to the differences with traditional wire scrapers in terms of Spreader quantity, etc., for correct application.
