Overview
Japan OSP-100 micron production rod (also known as Metering rod) is a custom production line rod used to control flow and maintain coating uniformity in paper, film and other production equipment. It adopts formed process and stainless steel material, and has the characteristics of rust prevention and wear resistance. Spreader Metering rod of OSP-100 L1000φ 16 model, rod diameter is 16mm, Spreader width is 1000mm, and can control Coating thickness is 100 microns. It is an original imported product of Japan OSP.
Features
1. Made of stainless steel to prevent rust and Abrasion Resistance.
2. It is a wire rod formed by the process, which can replace the traditional steel wire scraping rod.
3. The bottom of the groove is wider than the traditional wire scraper, and the amount of Spreader is generally larger.
4. Minimum 1.5μm wet film thickness can be controlled to achieve ultra-thin Spreader.
5. Specifications and lengths can be customized.
Principle
Spreader liquid on the substrate surface, using D-Bar to adjust (scrape off) the amount of liquid, thereby controlling the Coating thickness and uniformity.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Standards
Japan OSP original imported products
Steps
1. Spreader liquid on the surface of the substrate.
2. Use the D-Bar to adjust (scrape off) the amount of liquid.
Notice
• Please confirm that the product specifications match your application requirements before use.
• Please keep and maintain it properly to prolong its service life.
