Overview
Japan OSP-52 L1000φ 16 is a formed steel wire scraping rod (Metering rod), specially designed for paper, film and other production equipment, used to precisely control Spreader flow and maintain coating uniformity. The product is made of 304 stainless steel, which has anti-rust and wear resistance. The rod diameter is 16mm, the Spreader width is 1000mm, and the wet film thickness of 52 microns can be controlled. It is a custom production line rod imported from Japan OSP.
Features
1. Made of 304 stainless steel, it has better rust resistance and Abrasion Resistance.
2. formed process production, instead of traditional steel wire scrapers, to avoid loose wire, broken wire problems.
3. The bottom of the groove is wider, and the amount of Spreader is larger than that of the traditional winding rod.
4. Spreader can be performed, and the minimum wet film thickness of 1.5μm can be controlled.
5. The surface is chrome-plated.
6. Specifications and lengths can be customized according to requirements.
Principle
Spreader liquid on the surface of the substrate, using D-Bar Grooved Rods scraping coating, through its precise groove structure adjustment (scraping off) excess liquid, thereby controlling the amount of liquid Spreader onto the substrate, to achieve uniform, specific Film thickness coating.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Standards
Japan OSP original imported products
Steps
1. Spreader liquid is applied to the surface of the substrate.
2. Scrape the coating area with a D-Bar bar.
3. Adjust and scrape the excess liquid through the extrusion of the wire rod to control the Coating thickness.
Notice
• The product is a customized specification, and the specific length and other parameters need to be confirmed by consulting customer service.
• Before use, please confirm whether the product specifications (such as wet film thickness, Spreader width) meet the process requirements.
Please pay attention to the material and surface process characteristics of the product to ensure that it is suitable for your production environment.
