Overview
Japan OSP-40 micron production rod (also known as Metering rod) is a custom production line rod used to control flow and maintain coating uniformity in paper, film and other production equipment. It adopts formed process and stainless steel material, and has rust prevention and Abrasion Resistance. The product is OSP-40 L1000φ 16 model, rod diameter 16mm, Spreader width 1000mm, control Coating thickness 40 microns, is the original imported product of Japan OSP.
Features
1. Made of stainless steel to prevent rust and Abrasion Resistance.
2. It is the wire rod of the formed process, and the length of the specification can be customized.
3. Compared with the traditional steel wire scraper, it solves the problems of loose steel wire, broken wire, easy to clean, easy to block, and unable to freely change the surface shape.
4. D-Bar series products can be used for ultra-thin Spreader, and the minimum wet film thickness of 1.5μm. can be controlled.
5. The bottom of the groove of the D-Bar is wider than that of the traditional wire scraper, and the amount of Spreader is generally larger.
Principle
Spreader the liquid on the surface of the substrate, with D-Bar to adjust (scrape off) the amount of liquid to control the flow and maintain coating uniformity.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Standards
Japan OSP original imported products
Steps
1. Spreader the liquid on the surface of the substrate.
2. Use the D-Bar to adjust (scrape off) the amount of liquid to control the Coating thickness.
Notice
• This product is a customized production line rod, and the specific specifications and lengths need to be consulted by customer service.
• When using, pay attention to the compatibility of the substrate with the Spreader liquid.
• Please select the appropriate model according to the actual Spreader Film thickness requirements (such as 40 micron wet film thickness).
