Overview
Japanese OSP-30 micron production rod (also known as Metering rod) is a custom production line rod used to control flow and maintain coating uniformity in paper, film and other production machinery and equipment. It adopts formed process and stainless steel material, and has rust prevention and Abrasion Resistance. OSP-30 L1000φ 16 Spreader Metering rod is a custom rod with a rod diameter of 16mm, a Spreader width of 1000mm, and a control Coating thickness of 30 microns. It is an original imported product from Japan OSP.
Features
1. Made of stainless steel to prevent rust and Abrasion Resistance.
2. For the formed process wire rod, the length of the specification can be customized.
3. Compared with traditional steel wire scrapers, it solves the problems of loose wire, broken wire, difficult to clean, easy to block, and unable to freely change the surface shape.
4. D-Bar series can control the minimum wet film thickness of 1.5μm to achieve ultra-thin Spreader.
5. The bottom of the groove of the D-Bar is wider than that of the traditional wire scraper, and the amount of Spreader is generally larger.
Principle
Spreader the liquid on the surface of the substrate, with D-Bar to adjust (scrape off) the amount of liquid to control the flow and maintain coating uniformity.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light Paper, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Steps
1. Spreader the liquid on the surface of the substrate.
2. Scrape the Spreader area with a D-Bar bar and adjust (scrape off) excess liquid to control Coating thickness and uniformity.
Notice
- This product is a customized production line rod, and the specific specifications and lengths need to be consulted and confirmed according to requirements.
- Before use, please make sure to understand the product specifications, such as wet film thickness, Spreader width, etc., to ensure that it meets the application requirements.
- Please note the difference in the amount of Spreader compared to traditional steel wire scrapers, D-Bar generally has a larger amount of Spreader.
- To maintain performance, it is recommended to perform proper maintenance and cleaning according to the material characteristics of the product.
