Overview
Japan OSP-17 L1000φ 16 is a formed steel wire scraper, also known as Metering rod, used to control flow and maintain coating uniformity in paper, film and other production equipment. The product is made of stainless steel, with anti-rust and wear resistance. The rod diameter is 16mm, the Spreader width is 1000mm, and the controllable Coating thickness is 17 microns. It is an original imported product of Japan OSP.
Features
1. Made of stainless steel to prevent rust and Abrasion Resistance.
2. It is a formed process wire rod, which can replace the traditional steel wire scraping rod.
3. The bottom of the groove is wider than the traditional wire scraper, and the amount of Spreader is generally larger.
4. Minimum 1.5μm wet film thickness can be controlled to achieve ultra-thin Spreader.
5. Specifications and lengths can be customized.
Principle
Spreader liquid on the substrate surface, using a D-Bar formed wire scrapers to adjust (scrape off) the amount of liquid, thereby controlling the Coating thickness and uniformity.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Standards
Japan OSP original imported products
Steps
1. Spreader liquid on the substrate surface.
2. Use the D-Bar formed wire scraper to scrape through the Spreader area, adjust and scrape off excess liquid to control the Coating thickness.
Notice
• Before use, please confirm whether the product specifications (e.g. wet film thickness, Spreader width) meet your process requirements.
• Please select the appropriate Spreader stick according to the specific application field (e.g. film, Glass, paper).
• If you need non-standard specification length, please consult customer service for customization.
