Overview
Japanese OSP-15 micron production rod (also known as Metering rod) is a custom production line rod used to control flow and maintain coating uniformity in paper, film and other production machinery and equipment. It adopts formed process and stainless steel material, and has anti-rust and Abrasion Resistance. OSP-15 L1000φ 16 Spreader Metering rod is an original imported product from Japan with a rod diameter of 16mm, a Spreader width of 1000mm, and a control Coating thickness of 15 microns.
Features
1. Made of stainless steel to prevent rust and Abrasion Resistance.
2. As a D-Bar series product, it can replace traditional steel wire scrapers, solving the problems of loose wire, broken wire, difficult to clean, easy to clog, and the inability to freely change the surface shape.
3. Minimum 1.5μm wet film thickness can be controlled to achieve ultra-thin Spreader.
4. The bottom of the groove is wider than the traditional wire scraper, and the amount of Spreader is usually larger.
5. Specifications and lengths can be customized according to requirements.
Principle
Spreader liquid on the surface of the substrate, use the D-Bar to adjust (scrape off) the amount of liquid to control flow and maintain uniformity of the coating.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Steps
1. Spreader the liquid on the surface of the substrate.
2. Scrape the Spreader area with a D-Bar bar and adjust (scrape off) excess liquid to control Coating thickness and uniformity.
Notice
• This product is a customized production line rod, and the specific specification length needs to be consulted and confirmed according to actual needs.
• Please make sure to understand the product specifications before use, such as wet film thickness 15μm, total length 1000mm, effective Spreader width 1000mm, main rod diameter 16mm, etc.
• Note the difference in the amount of Spreader compared to the traditional wire scraper. The groove design of the D-Bar usually results in a larger amount of Spreader.
