Overview
Japanese OSP-13 micron production bar (also known as Metering rod) is a custom production bar used to control Flow rate and maintain coating uniformity in paper, film and other production machinery and equipment. It adopts formed process and stainless steel material, and has rust prevention and Abrasion Resistance. OSP-13 L1000φ 16 Spreader Metering rod is a rod diameter of 16mm, application width of 1000mm, control Coating thickness of 13 microns. Original imported products from Japan.
Features
1. Made of stainless steel to prevent rusting, Abrasion Resistance is better.
2. Using a formed process, it is an improved substitute for traditional steel wire coating bars (D-Bar).
3. Spreader can be performed, and the minimum wet film thickness of 1.5μm can be controlled.
4. The bottom of the groove is wider than the traditional steel wire coating bar, and the general Coating Weight is larger.
5. Specifications and lengths can be customized.
Principle
Spreader the liquid on the surface of the substrate, with D-Bar to adjust (scrape off) the amount of liquid to control Flow rate and maintain coating uniformity.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Steps
1. Spreader liquid on the surface of the substrate.
2. Use the D-Bar bar to adjust (scrape off) the amount of liquid.
Notice
• This product is a customized production bar, and the specific specification and length need to be consulted by customer service.
• Before use, please confirm that the model specifications (such as OSP-13 L1000φ 16) match your process requirements.
