Overview
Japan OSP-10 L1000φ 16 formed steel wire coating bar (Metering rod) is a custom production bar used to control Flow rate and maintain coating uniformity in paper, film and other production equipment. It is made of stainless steel, with anti-rust and wear resistance. It is an original imported product from Japan with a rod diameter of 16mm, an application width of 1000mm, and a control Coating thickness of 10 microns.
Features
1. Made of stainless steel, rust-proof and Abrasion Resistance is better.
2. The formed process can replace the traditional steel wire coating bar, which solves the problems of loose steel wire, broken wire, not easy to clean, easy to block and so on.
3. The surface shape can be freely changed to meet different Spreader requirements.
4. The groove bottom design is wider than the traditional steel wire coating bar, which can usually achieve greater Coating Weight.
5. Specifications and lengths can be customized according to requirements.
Principle
Spreader liquid on the surface of the substrate, using the formed wire coating bar (D-Bar) to adjust (scrape off) the amount of liquid, so as to precisely control the wet film thickness of the coating, to achieve uniform Spreader.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Standards
Japan OSP original imported products
Steps
1. Select the appropriate bar specification according to Spreader requirements.
2. Install the bar in the production equipment.
3. Spreader the liquid on the surface of the substrate.
4. Use bar to scrape the Spreader area, adjust and scrape off excess liquid to control Coating thickness.
Notice
• Before use, please confirm whether the bar specifications (such as wet film thickness, application width) meet the process requirements.
• Please perform proper maintenance and cleaning according to the material of the product (304 stainless steel).
• If you need non-standard specifications (such as different lengths), please consult the supplier for customization.
• Please pay attention to equipment safety regulations when operating.
