Overview
Japanese OSP-7 micron production bar (also known as Metering rod) is a custom production bar used to control Flow rate and maintain coating uniformity in paper, film and other production machinery and equipment. It adopts formed process and stainless steel material, and has rust prevention and Abrasion Resistance. OSP-07 L1000φ 16 Spreader Metering rod is a rod diameter of 16mm, application width of 1000mm, control Coating thickness of 7 microns. Original imported products from Japan.
Features
1. The formed process can replace the traditional steel wire coating bar, which solves the problems of loose steel wire, broken wire, not easy to clean, easy to block and so on.
2. Made of 304 stainless steel to prevent rusting and Abrasion Resistance.
3. The bottom of the groove is wider than the traditional steel wire coating bar, and the Coating Weight is usually larger.
4. Spreader can be performed, and the minimum wet film thickness of 1.5μm can be controlled.
5. Specifications and lengths can be customized.
Principle
Spreader the liquid on the surface of the substrate, with D-Bar to adjust (scrape off) the amount of liquid to control the Coating thickness and maintain uniformity.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Steps
1. Spreader the liquid on the surface of the substrate.
2. Use the D-Bar bar to scrape the Spreader area, adjust and scrape off excess liquid to control the Coating thickness.
Notice
• This product is a customized production bar, and the specific specifications (such as length) need to be consulted and confirmed according to requirements.
• When using, ensure that the operation meets the equipment and process requirements to achieve the expected Spreader effect.
