Overview
Japan OSP-05 L1000φ 16 formed steel wire coating bar (also known as Metering rod) is a custom production bar used to control Flow rate and maintain coating uniformity in paper, film and other production equipment. It is made of stainless steel, with anti-rust and wear resistance. It is an original imported product from Japan with a rod diameter of 16mm, an application width of 1000mm, and a control Coating thickness of 5 microns.
Features
1. Made of stainless steel, rust-proof and Abrasion Resistance is better.
2. As a D-Bar series product, it solves the problems of loose steel wire, broken wire, difficult to clean and easy to block, and unable to freely change the surface shape of the traditional steel wire coating bar.
3. Spreader can be performed, and the minimum wet film thickness of 1.5μm can be controlled.
4. The bottom of the groove is wider than the traditional steel wire coating bar, and the Coating Weight is usually larger.
5. Specifications and lengths can be customized according to requirements.
Principle
Spreader liquid on the surface of the substrate, use the D-Bar extrusion rod to adjust (scrape off) the amount of liquid, thereby controlling the Coating thickness and uniformity.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Steps
1. Spreader liquid on the substrate surface.
2. Use the D-Bar bar to scrape the Spreader area, adjust and scrape off excess liquid to control the Coating thickness.
Notice
• This product is a customized production bar, and the specific specification and length need to be consulted by customer service.
• It should be cleaned in time after use to prevent blockage.
• Please pay attention to product specifications, such as wet film thickness, application width, etc., to ensure compliance with production requirements.
