Overview
The YN-DLD100S (pneumatic) Basis Weight Sampler, also known as the circular Basis Weight Sampler, is a sampling device for detecting standard samples of high-Grammage materials. It uses pneumatic sampling to quickly and accurately cut 100cm ² standard samples. It is suitable for detecting the unit area weight (g/m ²) of high-strength cardboard, Spinning & Weaving products, glass fiber materials, copper foil and aluminum foil. It ensures that every weighing from the first time can provide accurate data. It is an ideal choice for paper laboratories and Quality control departments.
Features
1. Independent research and development, customizable size.
2. Pneumatic stamping mode, automatic sampling saves time and effort.
3. Foot-type pressurization mode, one person can easily complete sampling.
4. Built-in safety buffer protection device, safe and accurate, convenient and fast.
50,000 high precision wire cutting, triple high temperature quenching, triple fine grinding fine workmanship.
6.316L stainless steel quenching precision grinding arc knife, long service life, wide range of applications.
7. Special treatment of the die blade is adopted, which is not artificially damaged and can be replaced without replacement for 10 years.
Principle
This device uses a pneumatic device for sampling. During operation, the sample is placed in the sampling area, and the foot valve of the pneumatic control element can drive the cylinder to quickly cut a standard round sample of 100cm ². Then the cut sample is weighed on the Balance, and the Grammage (g/m ²) of the product is calculated.
Applications
High Strength Cardboard, Spinning & Weaving Products, Glass Fiber Materials, Copper Foil, Aluminum Foil and Other Sheet Materials, Paper Lab, Quality control department
Standards
GB/T 451.2、ISO 536、QB/T1671、GB/T460、GB/T1540、GB/T426
Steps
1. Place the sample to be tested in the sampling area of the Sampler.
2. Step on the pneumatic control element foot valve and start the equipment to cut the standard sample.
3. Remove the cut 100cm ² round sample.
4. Place the specimen on the Balance for accurate weighing.
5. Calculate the unit area Grammage (g/m ²) of the product according to the weighing result.
Notice
• This product is suitable for sampling materials with a thickness range of 0.1 to 8.0mm.
• Sample size requires a diameter greater than 150mm.
• Operation requires the use of vacuum Compressor gas source, Operating Pressure range is 4~ 10kPa.
• It is recommended to work in an environment with temperature (20 +/- 10) ° C and Humidity < 85%.
The blade is specially treated and has a long service life in the case of non-human or special high-strength material damage, but it is still necessary to pay attention to standard operation.
• The device has a built-in safety buffer protection device, but it still needs to be operated according to procedures to ensure safety.
