Overview
OSP-13 L1000/φ 10 is a formed steel wire coating bar, which belongs to the OSP series Metering rod, which can be used for printing Spreaders such as paper and film. Its Coating Weight, Length and surface preparation can be customized according to requirements, and are widely used in paint inks, printing paper Encasement, tape protective film and other industries.
Features
1. Coating Weight, length and surface preparation can be customized.
2. It belongs to the D-Bar (standard) groove specification, and can achieve more Spreader liquid transfer than bar under the same 1mm area.
3. Provide system selection guidance and comprehensive customization services.
Principle
Measurement and transfer of coating solution is made of a formed wire coating bar (D-Bar). In the Spreader process, the groove specification directly affects the transfer amount of the Spreader solution, thus achieving specific wet film thickness control.
Applications
Paint inks, paper printing Encasement, tape protective film
Standards
The information does not mention the specific standards that the product meets.
Steps
The data does not provide specific operation steps.
Notice
* The 1mm area shown in the groove specification table is the measurement data for the test piece with a material diameter of φ 10.
Test pieces used for measurement data have not been surface prepared.
* 1 mm area may vary depending on the selected material diameter, surface preparation type and thickness.
* Our 1mm area does not guarantee Coating Weight and may differ from the estimated film thickness depending on Spreader conditions and the physical properties of the Spreader liquid, so please use this as a reference value only.
