Overview
OSP-18 L1000/φ 10 is a formed steel wire coating bar, which belongs to the OSP series Metering rod, which can be used for printing Spreaders such as paper and film. Coating Weight, length and surface preparation can be customized according to requirements. Widely used in paint inks, printing paper Encasement, tape protective film and other industries.
Features
1. Coating Weight, length and surface preparation can be customized as required.
2. Provide system selection guidance and comprehensive customization services.
3. In the case of the same 1mm area, the transfer amount of Spreader liquid is usually more than bar.
Principle
The product is a D-Bar (standard) groove size Metering rod. The transfer amount of Spreader liquid is related to the groove size, and usually the transfer amount of Spreader liquid of D-Bar is more than that of bar. Its 1mm area Coat Weight is the reference value, and the actual Coat Weight will vary according to the Spreader conditions and the physical characteristics of the Spreader liquid.
Applications
Paint inks, paper printing Encasement, tape protective film
Notice
* The 1mm area shown in the groove specification table is the measurement data for the test piece with a material diameter of φ 10.
Test pieces used for measurement data have not been surface prepared.
* 1 mm area may vary depending on the selected material diameter, type of surface preparation and thickness.
* Our 1mm area does not guarantee Coating Weight and may differ from the estimated film thickness depending on Spreader conditions and the physical properties of the Spreader liquid, so please use this as a reference value only.
