Overview
OSP-45 L1000/φ 10 is a formed steel wire coating bar, which belongs to the OSP series Metering rod, which can be used for printing Spreaders such as paper and film. Coating Weight, length and surface preparation can be customized according to requirements. Widely used in paint inks, printing paper Encasement, tape protective film and other industries.
Features
1. Coating Weight, length and surface preparation can be customized.
2. Provide system selection guidance and comprehensive customization services.
3. In the case of the same 1mm area, the D-Bar (standard groove specification) has more applications than the bar.
Principle
This product is a formed steel wire coating bar, which controls the transfer amount of Spreader liquid through its specific groove specification (D-Bar), so as to form a wet-film of predetermined thickness on a substrate such as paper and film. The transfer amount of Spreader liquid is usually related to the groove specification.
Applications
Paint inks, paper printing Encasement, tape protective film
Notice
* The 1mm area shown in the groove specification table is the measurement data for the test piece with a material diameter of φ 10.
Test pieces used for measurement data have not been surface prepared.
* 1 mm area may vary depending on the selected material diameter, type of surface preparation and thickness.
* Our 1mm area does not guarantee Coating Weight and may differ from the estimated film thickness depending on Spreader conditions and the physical properties of the Spreader liquid, so please use this as a reference value only.
