Overview
MUXUAN MXY-11 Basket Grinder is a pneumatic lift basket Grinder, an economical wet dispersion grinding equipment developed for scientific research institutions and enterprises. The equipment can operate stably for a long time, with low noise, and can complete both dispersion and grinding processes at the same time, so as to effectively reduce the fineness of medium and low viscosity materials in a short time.
Features
1. High grinding efficiency, good product fineness: Rotation speed of the equipment can reach 2800rpm, powerful arc impeller kinetic energy drive, zirconia dial rod causes irregular movement of the grinding medium in the cavity, high-speed collision and friction between each other, so that the powder particle size quickly becomes smaller; The separation plate adopts CNC numerical control processing of the whole material, which does not block and has a long life and reduces maintenance costs.
2. Easy to operate and easy to clean: the equipment comes with an energy-saving inverter, which can directly control the start and speed regulation of the equipment; through the cylinder as a lifting actuator, with a pneumatic control valve to control the grinding device to rise, stop and fall, low air consumption, simple operation; with manual barrel clamping device, the grinding barrel can be quickly fixed to prevent accidents caused by displacement of the barrel during work; the frame has casters, which takes up a small space and is easy to move.
3. Small temperature rise, stable product: the batching barrel has a double-decked chill down jacket, which is cooled down by water when the equipment is running, and has a good chill down effect. The conventional temperature rise is less than 10 °; the grinding cavity can be customized with chill down.
4. Strong non-standard: non-standard customized explosion-proof type; ground cavity can be customized zirconia material; equipment material can be customized SS316L stainless steel.
Principle
The motor operation of the pneumatic lift basket grinder drives the high-speed swirl/spin of the dial and the bottom dispersion disc, so that the upper part of the dispersion disc and the inside of the basket cavity form a vacuum, and the Stock is sucked into the basket grinding cavity. The grinding medium in the dial drive cavity generates force in all directions, and the particles in the material are constantly collided and rubbed by the medium, the particle size becomes smaller, and the particle size range narrows; the high-speed operation of the dispersion disc produces eddy current to suck out the material in the cavity and recycle it to the feed, which has a very significant dispersion mixing effect. Through the valve swirl/spin or solenoid valve point control to achieve cylinder work, the use of cylinder lift drive motor and working head lift.
Applications
It is suitable for materials with high fineness requirements, such as interior-wall latex paint, industrial paint, wood paint, various colorants, water-based oily inks, pesticide suspensions, etc.
Steps
1. Start the device: Control the device to start through the energy-saving inverter that comes with the device.
2. Speed regulation: Adjust the equipment Rotation speed through the frequency converter (speed range 0~ 1500rpm).
3. Lifting control: control the rise, stop and fall of the grinding device through the pneumatic control valve.
4. Fixed Mixing Tank: Use the manual clamping device to quickly fix the grinding bucket.
5. Chill down: Chill down the double-decked chill down jacket of the Mixing Tank.
Notice
• Applicable material viscosity should be ≤ 5000cps (mPas).
• Before use, make sure that the manual barrel clamping device has firmly fixed the grinding barrel to prevent accidents caused by the displacement of the barrel during work.
• When the equipment is running, pay attention to observe the temperature rise. The conventional temperature rise should be less than 10 ° C. If necessary, the chill down jacket can be used to chill down.
• According to the material characteristics, the material of the material contact part can be customized with 304/316/Hastelloy/Titanium Molybdenum Nickel Alloy and other materials.
• When the equipment is moved, it can be operated with rack casters.
