Overview
MUXUAN MXY-18.5 (Hydraulic) Basket Grinder is an intermittent industrial production equipment that integrates dispersion and grinding functions. It is suitable for wet grinding of medium and low viscosity fluids. The equipment adopts hydraulic cylinder lifting, stable operation and environmental protection without leakage. Its grinding basket structure is reasonably designed, which is easy to clean and replace product varieties and Colors. It is an ideal grinding equipment for multi-variety and multi-Color production.
Features
1, high grinding efficiency, good product fineness: strong kinetic energy drive zirconia lever to produce high-speed collision and friction of grinding medium, can quickly reduce the powder particle size, fineness of grinding generally up to about 5 microns, some products up to sub-micron or even nano scale.
2, easy to operate: hydraulic cylinder control lifting, simple and stable operation; equipped with holding device can quickly fix the grinding barrel, prevent work displacement.
3. Small temperature rise, stable product: standard double-decked chill down jacket Mixing Tank, running water chill down, conventional temperature rise is less than 10 ℃; grinding cavity can also be customized chill down function.
4. Strong non-standard: explosion-proof and vacuum equipment can be customized according to needs; zirconia material can be selected for the grinding cavity; the main material of the equipment can be customized as SS316L stainless steel, etc.
Principle
The motor operation drives the dials and bottom dispersion disc to swirl/spin at high speed, forming a vacuum inside the grinding basket cavity and sucking the Stock into the grinding cavity. The grinding medium in the dials drives the cavity to produce multi-directional motion, and the particle size and distribution become smaller and narrower through the continuous collision and friction of the medium on the material particles. At the same time, the eddy current generated by the high-speed swirl/spin of the dispersion disc pulls the ground material out of the cavity and circulates it to the feed port to achieve an efficient dispersion mixing effect. The lifting of the equipment is completed by the hydraulic pump driving the hydraulic plunger.
Applications
Interior-wall latex paint, industrial paint, wood paint, various colorants, water-based oily inks, pesticide suspensions
Steps
1. Control the grinding device to descend into the grinding bucket through the hydraulic system.
2. Use the clamping device to quickly fix the grinding bucket.
3. Start the motor and set the Rotation speed according to the process requirements (adjustable from 0 to 1300rpm).
4, the material is sucked into the grinding chamber for grinding and dispersion circulation.
5. After the grinding is completed, stop the motor and raise the grinding device through the hydraulic system.
6. Clean the equipment to change the variety or Color.
Notice
• Applicable material viscosity should be ≤ 5000cps (mPas).
• 1.2-2 pure zirconia beads are recommended for grinding media.
• Before the equipment runs, make sure that the grinding bucket is fixed to prevent displacement.
• According to the material characteristics, you can contact the supplier to customize the appropriate material for the material contact part (such as 304/316 stainless steel, etc.).
• Pay attention to the grinding volume range corresponding to the equipment model (MXY-18.5 model is 80-600L) to avoid overload operation.
