Overview
BANTE S30-I Bluetooth ion meter is a high-performance wireless Bluetooth ion meter suitable for Android smartphones or tablets, supports 5 point button calibrating, and can be equipped with various ion selective Electrode. The meter is dedicated to testing Ion concentration, Measurement range 0.00000001~ 1mol/L, Measurement accuracy +/- 1% F.S.
Features
1. High-performance Bluetooth ion meter, providing 5 Ion concentration Measuring methods.
2. Optional Ion concentration units, including ppm, mg/L, mol/L and mmol/L.
3.2 to 5 point calibrated, including 8 concentration calibrated points optional.
4. Electrode management, can store 3 Electrode slope and call calibrate data.
5. Manual temperature compensation to eliminate measurement errors caused by temperature deviation.
6. Automatic end point locking, maintaining stable readings for easy browsing and recording.
7. Timed interval readings, sending measurement data to memory or printer.
8. Limit alarm, automatic warning Measured value exceeds the set range.
9. Calibrate expiration reminder prompts the user to calibrate the meter regularly.
10. calibrate report, showing date, time, calibrate point and slope.
11. Password protection against unauthorized calibrating with settings.
12. Multi-Parameter measurement, can connect Bluetooth conductivity and dissolved oxygen meter to the device and display Measured value.
13. Reset function, automatically restore the meter to the factory default settings.
Principle
The ion meter connects to Android devices via Bluetooth, uses ion selective Electrode for measurement, supports a variety of Measuring methods such as direct reading, known addition, etc., combined with manual temperature compensation and automatic end point locking function to ensure Measurement accuracy and Stability.
Steps
1. Turn on the meter and ensure that Bluetooth is connected to the Android device.
2. Select Ion concentration unit and Measuring method.
3. Perform 2 to 5 point calibrating with optional calibrating fluid.
4. Connect Ion Selective Electrode and start measurement.
5. Set timed interval readings or automatic end point locking as required.
6. View measurement data and send it to memory or printer via Bluetooth.
Notice
• Periodically calibrate the meter to ensure Measurement accuracy.
• Use manual temperature compensation function to avoid temperature errors.
• Pay attention to the calibration expiration reminder and calibrate in time.
• Set up password protection to prevent unauthorized operation.
• Make sure the Bluetooth connection is within 10 meters.
• Power supply type specified (1.2V lithium battery or AAA battery 2).
