Overview
The BANTE S30-NH3 Bluetooth ion meter is a high-performance wireless Bluetooth ion meter for Android smartphones or tablets. The meter can be equipped with various types of ion selective Electrode, and the Measurement accuracy is 1% F.S. This S30-NH3 is dedicated to testing ammonia Ion concentration, with a range of 0.000001~ 1mol/L and a Measurement accuracy of +/- 1% F.S.
Features
1. High-performance Bluetooth ion meter, providing 5 Ion concentration Measuring methods.
2. Optional Ion concentration units, including ppm, mg/L, mol/L and mmol/L.
3.2 to 5 point calibrated, including 8 concentration calibrated points optional.
4. Electrode management, can store 3 Electrode slope and call calibrate data.
5. Manual temperature compensation to eliminate measurement errors caused by temperature deviation.
6. Automatic end point locking, maintaining stable readings for easy browsing and recording.
7. Timed interval readings, sending measurement data to memory or printer.
8. Limit alarm, automatic warning Measured value exceeds the set range.
9. Calibrate expiration reminder prompts the user to calibrate the meter regularly.
10. calibrate report, showing date, time, calibrate point and slope.
11. Password protection against unauthorized calibrating with settings.
12. Multi-Parameter measurement, can connect Bluetooth conductivity and dissolved oxygen meter to the device and display Measured value.
13. Reset function, automatically restore the meter to the factory default settings.
Principle
The ion meter measures the Ion concentration in the solution by mating Ion Selective Electrode. The meter is connected to an Android smart device via Bluetooth and provides a variety of Measuring methods (such as direct reading, known addition, etc.) and unit selection. With manual temperature compensation function, measurement errors caused by temperature changes can be eliminated to ensure the accuracy of measurement results.
Applications
Ion concentration measurement
Steps
1. Connect to Bluetooth: Connect the meter to an Android smartphone or tablet via Bluetooth 4.0 or higher.
2. Electrode preparation: according to the measurement requirements, with the corresponding ion selective Electrode.
3. calibrating instrument: using the standard liquid provided, 2 to 5 point calibrating.
4. Set parameters: Measurement unit, Measuring method, temperature compensation mode, etc. are selected according to needs.
5. Start measurement: Electrode is immersed in the solution to be tested, and the meter will display the measurement result.
6. Data logging: The reading can be locked using the automatic destination lock function, and the data can be sent to the memory or printer through the timed interval reading function.
Notice
Please read the instructions carefully before use.
• Make sure the Electrode is properly connected to the meter.
• Regularly calibrate to ensure Measurement accuracy, and pay attention to the calibration expiration reminder.
• Manual temperature compensation to eliminate temperature effects.
• Clean and store Electrode properly after use.
• Pay attention to the battery level and replace the battery in time.
The effective distance of a Bluetooth connection is approximately 10 meters.
• Set a password to prevent unauthorized operations.
