Overview
The YH1000 haze meter (economical) easily implements ASTM D1003 non-compensated, full light transmitance and haze testing. Its open sample compartment supports vertical and horizontal testing to accommodate more samples under test. Using PD array detectors to meet CIE V (lambda) 2 degrees Visual Response, compensated measurement can achieve High Accuracy and repeability of light transmitance and haze data measurement.
Features
1. Meet ASTM standards and meet a variety of testing standards
2. Easy to operate, equipped with large size touch screen, faster and more accurate measurement, PD array detector for High Accuracy and repeability measurement, equipped with USB data output device
3. Dynamic measurement, Illuminant detectors and temperature sensors monitor Illuminant and environment changes to ensure reliable test data
4. Easy measurement, open measurement area can be vertical, horizontal test, adapt to more tested samples
5. Quality management software, providing powerful haze and light transmitance measurement and analysis software, supporting data tabulation management, comparison and test report generation
Principle
The YH1000 haze meter adopts transmission illumination mode (0/D, parallel light illumination, diffuse reflection reception), and uses a combined LED Illuminant with integrating sphere size φ 154mm and 400~ 700nm. High Accuracy measurement of light transmitance and haze is achieved through PD array detector to meet CIE V (lambda) 2 degree visual Response.
Applications
Glass Processing, Plastic Processing, Film, Display Processing, Encasement Industry, Liquid Liquid Analysis
Standards
ASTM D1003/1044、GB/T 2410、JJF 1303-2011、CIE 15.2、JIS K7105、JIS K7361、JIS K 7136
Steps
1. Instrument preheating correction
2. Place the sample in the open measurement area, choose vertical or horizontal test
3. Set parameters through large-size touch operation screen
4. Start the measurement and complete in about 1.5 seconds
5. Output data through USB interface or connect to quality management software for analysis
Notice
• Temperature range from 0 to 40 ° C (32 to 104 ° F)
• Storage Temperature range -20~ 50 ° C (-4~ 122 ° F)
• Sample thickness should be less than 170mm
• Make sure the instrument is preheated and corrected for measurement to ensure Repeatability
• Power supply with DC 24V, 3A Power Adapter
