Overview
The TENLIN DC-3010 Vertical Low Temperature Circulating Bath is a thermostatic device with a Temperature range of -30 to 100 ° C and a Tank volume of 10L. The device uses self-developed temperature control technology, with High Accuracy Temperature Control, Fast Cooling and Multiple Safety protection functions, suitable for experimental and production scenarios that require precise temperature control.
Features
1. Adopt self-developed temperature control technology, equipped with High Accuracy PT100 Sensor and imported electronic components.
2. The software system can correct the error between the displayed temperature and the actual temperature to ensure accurate temperature display.
3. Standard large-screen LCD display, Temperature Display resolution up to 0.01 ℃.
4. With over-temperature protection, over-temperature alarm function, can set the alarm temperature and automatically cut off the load.
5. With timing function, the total working time of the equipment can be set, and the load can be automatically cut off at that time.
6. Adopt hidden chilled down coil design to ensure larger space in the groove.
7. Intelligent Software Temperature Stability, PID can automatically adjust parameters, also supports manual adjustment.
8. Use software to digitally lock Control system settings to avoid misoperation.
9. The fully enclosed Compressor is used for refrigeration, with fast cooling speed and multiple protections such as overheating and overcurrent.
10. Standard internal and external circulation function, external circulation import and export outer diameter is 10mm round tube.
11. Support non-standard customization.
Principle
The device detects the temperature of the medium in the tank through the High Accuracy PT100 Sensor and transmits the signal to the Control system. The Control system uses an intelligent PID algorithm to automatically adjust the Power output of the heating or cooling system according to the difference between the set temperature and the measured temperature to achieve fast and stable temperature control. At the same time, through the internal and external circulation pumps, the thermostatic medium in the tank can be exported to provide a thermostatic environment for external equipment.
Applications
Laboratory thermostatic experiment, sample thermostatic reaction, material performance test, biological foster, chemical synthesis, instrument calibrating
Standards
The data did not mention specific compliance criteria
Steps
1. Add an appropriate amount of suitable medium to the Tank.
2. Power on the device.
3. Set the required temperature, timing duration and other parameters through the control panel.
4. Start the equipment, start the equipment, and heat or cool it to reach the set temperature.
5. After the temperature is stable, the sample can be placed in the tank or connected to the external circulation pipeline.
6. After use, turn off the power supply of the equipment and do a good job of cleaning and maintenance.
Notice
Please read the instructions carefully before use to ensure that it is used under the specified environment conditions.
The liquid level of the added medium should be within the allowable range to avoid dry burning or overflow.
● When the equipment is running, do not block the entry and exit trends to ensure good heat dissipation.
Before performing any cleaning or maintenance, be sure to cut off the power supply to the equipment.
Do not disassemble or modify the internal components of the equipment without authorization.
If the equipment alarms or malfunctions, stop using it immediately and contact a professional.
● When not in use for a long time, please empty the medium in the tank and store it properly.
