Overview
HUXI HLC-2508 Vertical High and Low Temperature Circulating Bath is a device used to provide a heat-cold controlled, uniform temperature constant field source. It is widely used in universities and enterprises in the biological, chemical, chemical, life science, physical property testing and other industries. Quality control, can perform constant temperature tests or tests on specimens or products, and can also be used as a direct or auxiliary heating/cooling heat or cold source.
Features
1. Maintenance-free pressure/suction pump, resistant to fiber and metal particles, supports horizontal and vertical two-way mixing to ensure uniform mixing.
2. Multiple safety protections, including low liquid level protection, can be alerted by light and sound at the same time when alarming.
3. Parts that come into contact with liquids or vapors are made of high-performance stainless steel and high-performance plastics.
4. Pt100 temperature sensor, support single point and two point temperature calibrating.
5. Can be domestic circulation, standard two different height sample cup bracket, suitable for different sample cup thermostatic and viscosity test.
6. Can be external circulation, to achieve the Viscometer water bath jacket thermostatic, suitable for Viscometer in the bath outside the sample viscosity test.
7. The buzzer can be set to silent or audible.
Principle
The device is used for domestic circulation or external circulation via a pressure/suction pump, combined with the Pt100 temperature sensor for precise temperature control, providing a stable temperature field source. Domestic circulation uses the sample cup holder for thermostatic and viscosity testing, and external circulation uses the Viscometer water bath jacket for thermostatic to ensure uniform and constant temperature.
Applications
Biological, chemical, chemical, life sciences, physical property testing
Steps
Connect the power supply to ensure that the voltage is within the range of 200-230V.
2. Check the liquid level to avoid low liquid level conditions, and add bath liquid if necessary.
3. Set the required temperature through the membrane button, with a range of -25 to 100 degrees Celsius.
4. Select the domestic circulation or external circulation mode, and use the sample cup bracket to place the sample cup during domestic circulation.
5. Start the device, monitor temperature fluctuations and resolution to ensure stability at the set value.
6. After the test is completed, turn off the device and disconnect the power supply.
Notice
Check the liquid level before use to avoid low-level operation to prevent damage to the equipment.
- Ensure that the Ambient Temperature is within the range of 5~ 32 ° C to ensure the normal operation of the equipment.
- Power supply voltage matching, avoid overvoltage or undervoltage use.
Regularly clean and maintain pumps and contact parts to prevent the accumulation of fiber and metal particles.
- Set Buzzer Alarm Mode for Timely Response to Abnormal Situations.
- Device weight, Net weight 26KG, gross weight 28KG, to avoid accidental damage.
