Overview
The TENLIN DC-0515 Vertical Low Temperature Circulating Bath is a precision temperature control device with a Temperature range of -5 to 100 ° C and a Tank volume of 15L. The device uses self-developed temperature control technology, with High Accuracy Temperature Control and stable performance, suitable for various experiments and tests requiring precise thermostatic environment.
Features
1. Adopt self-developed temperature control technology, equipped with High Accuracy PT100 Sensor and imported electronic components.
2. The software system can correct the error between the displayed temperature and the actual temperature to ensure accurate temperature display.
3. Standard large-screen LCD display, Temperature Display resolution up to 0.01 ℃, a number of data at a glance.
4. With over-temperature protection and alarm function, the alarm temperature can be set, and the load can be automatically cut off when the temperature is exceeded.
5. With timing function, the total Operating Time of the equipment can be set, and the load can be automatically cut off at that time.
6. Adopt hidden chilled down coil design to ensure greater use space in the groove.
7. Intelligent Software Temperature Stability, PID can automatically adjust parameters, special users can also manually adjust.
8. Use software digital lock Control system settings to prevent misoperation and ensure accurate experimental data.
9. The fully enclosed Compressor is used for refrigeration, with fast cooling speed and multiple protections such as overheating and overcurrent.
10. Standard internal and external circulation function, external circulation interface for the outer diameter of 10mm round tube, to meet the needs of multiple scenes.
11. Support non-standard customization.
Principle
The device senses the medium temperature in the tank through the High Accuracy PT100 Sensor and transmits the signal to the Control system. The Control system uses an intelligent PID algorithm to automatically or manually adjust the output power of the heating or cooling system according to the difference between the set temperature and the measured temperature for fast and accurate temperature control. Standard internal and external circulation pumps circulate thermostatic media to external devices for extended Temperature range.
Applications
Chemical synthesis, biological foster, material testing, Petrochemicals, pharmaceutical research and development, Measurement calibrating, colleges and universities, research institutes
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Add an appropriate amount of suitable medium to the Tank.
3. Turn on the power switch and set the required temperature, timing duration and other parameters through the control panel.
4. Start the device, the system starts working, and automatically adjusts the temperature.
5. After the experiment, turn off the power supply of the equipment and do a good job of cleaning and maintenance.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
• Please ensure that the medium liquid level in the Tank is appropriate before use.
• Do not make unnecessary parameter modifications or illegal operations while the device is running.
• Pay attention to the over-temperature alarm setting of the equipment to ensure the safety of the experiment.
• Regularly clean and maintain equipment to maintain its performance.
• When making non-standard customizations or using Optional accessories (such as liquid level protection, RS485 communication, etc.), please follow the relevant instructions.
