Overview
TENLIN DC-2015 Vertical Low Temperature Circulating Bath is a precision thermostatic device with a Temperature range of -20~ 100 ° C and a Tank volume of 15L. It uses self-developed temperature control technology, with High Accuracy Temperature Control and Stability, suitable for various experiments and tests that require precise temperature environments.
Features
1. Adopt self-developed temperature control technology, equipped with High Accuracy PT100 Sensor and imported electronic components.
2. The software system can correct the error between the displayed temperature and the actual temperature to ensure accurate display.
3. Standard large-screen LCD display, Temperature Display resolution up to 0.01 ℃.
4. With over-temperature protection, over-temperature alarm function, can set the alarm temperature and automatically cut off the load.
5. With timing function, the total Operating Time of the equipment can be set, and the load can be automatically cut off at that time.
6. Adopt hidden chilled down coil design to ensure greater space in the groove.
7. Intelligent Software Temperature Stability, PID can automatically adjust parameters, also supports manual adjustment.
8. Use software digital lock Control system settings to prevent misoperation and ensure accurate experimental data.
9. The fully enclosed Compressor is used for refrigeration, with fast cooling speed and multiple protections such as overheating and overcurrent.
10. Standard internal and external circulation function, external circulation interface for the outer diameter of 10mm round tube.
11. Support non-standard customization.
Principle
The device monitors the temperature of the medium in the tank in real time through the High Accuracy PT100 Sensor and transmits the signal to the Control system. The Control system uses an intelligent PID algorithm to automatically adjust the working status of the heater and the fully enclosed Compressor refrigeration system according to the deviation of the set temperature and the actual temperature, so as to achieve fast and accurate temperature control and stability. The standard internal and external circulation pump can circulate the thermostatic medium to the external device to extend the Temperature range.
Applications
Laboratory thermostatic experiments, sample reactions, material testing, bio-fostering, viscosity determination, density determination, Petrochemicals analysis
Standards
The data did not mention specific compliance criteria
Steps
1. Add an appropriate amount of suitable medium to the Tank.
2. Turn on the power supply and turn on the power switch of the device.
3. Set the required temperature value, over-temperature alarm temperature and timing duration through the control panel.
4. Start the equipment, the refrigeration/heating system starts working, and the circulating pump runs.
5. After the equipment reaches the set temperature and stabilizes, the experiment can begin.
6. After the experiment, turn off the power supply of the equipment and do a good job of cleaning and maintenance.
Notice
● Please read the instructions carefully before use to ensure that it is used at Rated voltage.
The medium level in the tank should be kept within a reasonable range to avoid dry burning or overflow.
● When the equipment is running, do not block the entry and exit trends to ensure good heat dissipation.
Before moving or cleaning equipment, be sure to cut off the power supply.
Non-professionals should not disassemble or modify the internal structure and parameters of the equipment without authorization.
If a liquid level protection system is selected, ensure its normal operation.
● When making external circulation connections, make sure that the pipeline connections are firm and leak-free.
● When not in use for a long time, please empty the medium in the tank and keep the equipment drying.
