Overview
TENLIN BD-0506 is a High Accuracy Low Temperature Circulating Bath with Temperature range -5~ 100 ℃, Temperature resolution up to 0.001 ℃, and Temperature Fluctuation up to +/- 005-0.01 ℃. The device has a Tank volume of 6L and adopts domestic circulation mode. It has the characteristics of fast cooling speed and strong temperature Stability.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Control system adopts self-developed special software and temperature control technology, equipped with High Accuracy Pt100 and imported electronic components.
3, with internal and external circulation system, external circulation can establish a second thermostatic field or as an external cold source, domestic circulation to ensure that the liquid temperature in the tank is uniform and stable.
4, has a perfect protection system, including Compressor overheating and overcurrent protection, Control system over-temperature sound and light alarm, over-temperature automatic load cutting and other functions.
5. Equipped with a large LCD control instrument, it is easy to operate and supports P.I.D automatic search or manual adjustment.
6, with accurate temperature correction function, the correction accuracy can reach 0.01 ℃.
Principle
The Thermostatic bath achieves rapid cooling through an Air-Cooled fully enclosed Compressor refrigeration system. The Control system monitors the temperature through the High Accuracy Pt100 Sensor and uses a self-developed software algorithm for precise P.I.D regulation to maintain the set temperature. The circulation system circulates the working medium (liquid) in the tank (domestic circulation) or connected to external equipment (external circulation) by pump drive, thus establishing a uniform and stable thermostatic environment.
Applications
This product is suitable for all kinds of experiments and tests that require High Accuracy thermostatic environment. Applications include but are not limited to: Biochemical experiments, material testing, physical research, Measurement calibrating, Petrochemicals analysis, pharmaceutical research and development, etc.
Standards
No specific standards were mentioned in the data.
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Inject an appropriate amount of suitable medium (e.g. silicone oil, water, etc.) into the Tank.
3. Turn on the power switch and set the required temperature and Miscellaneous parameters through the large LCD control panel.
4. Choose domestic circulation or external circulation mode as needed.
5. Start the device and the system will automatically run and reach the set temperature.
6. After use, shut down the equipment according to the procedures and maintain it properly.
Notice
* Equipment should be placed in a smooth, well-ventilated environment for use.
Before use, please ensure that the medium level in the Tank is appropriate and the appropriate medium is selected.
Do not cover or block the heat sink while the device is running.
* Set the upper and lower limits of the over-temperature alarm temperature, and pay attention to the alarm prompt.
* When making external circulation connections, ensure that the pipeline connections are firm and leak-free.
Regularly maintain and clean the equipment.
Non-professional personnel should not disassemble or repair the internal components of the equipment.
