Overview
CCT CCT230-L400 coating rod is an experimental Metering rod, mainly used for manual or automatic Spreader on paper, film and other substrates. It distributes the paint evenly on the surface of the substrate by scraping, and achieves a fixed wet film thickness (this model is 230 microns).
Features
1. Spreader wet film thickness range is wide, this model is 230 microns, support Miscellaneous model customization.
2. The groove design is not easy to clog and easy to clean.
3. Spreader accuracy is high, and product mass control is strict.
4. The brand has more than 10 years of service experience in the field of Spreader.
5. Support product customization services.
Principle
Spreader the coating rod uniformly on the surface of paper, film and other substrates through the specific grooved structure on its surface, and precisely control the formed wet film thickness.
Applications
Laboratory Manual Spreader with Automatic film applicator
Steps
1. Select the appropriate coating rod model according to the required wet film thickness.
2. Place the paint on the substrate.
3. Use the coating rod (manually or through the Coater) to scrape at uniform speed and pressure.
4. After completing the Spreader, clean the coating rod in time.
Notice
• Please confirm that the coating rod model matches the required wet film thickness before use.
• Maintain uniform scraping speed and pressure during operation to ensure Spreader effect.
• After use, it should be cleaned in time to prevent the paint from drying up and blocking the grooves.
• Please keep it properly to avoid bumping and damaging the surface of the rod body.
• Support customization, if you have special needs, you can contact the supplier.
