Overview
RDS #31 Mayer Rods is a wire-wound Applicator rod with a film thickness of 70.9 microns. The rod length is 400mm and the effective application width is 300mm. It provides three diameter specifications of 6.35mm, 9.5mm and 12.7mm, of which 9.5mm diameter is widely used. The product is popular in Coatings, inks, Building materials and other industries, and meets many user experimental requirements.
Features
1. The film thickness is accurate to 70.9 microns
2. Provide 6.35mm, 9.5mm, 12.7mm three diameter specifications to choose from
3. Bar length 400mm, effective application width 300mm, in line with experimental standards
4. Made of stainless steel, strong durability
5. Wire-wound production process, Spreader evenly
Principle
RDS Mayer Rods uses a wire-wound design to form a uniform Spreader gap on the surface of the rod body. When the coating applicator moves on the surface of the substrate, the Coating or inks are evenly Spreader through the wire gap to form a thickness of 70.9 microns. Wet-film.
Applications
Coatings, inks, Building materials, Resins, Pigments, architectural coatings, Plastic films, Quality inspection organizations, Adhesives
Standards
user experimentation requirements
Steps
1. Choose the right diameter Mayer Rods
2. Coatings or inks evenly on the surface of the substrate
3. Handheld at both ends of the coating applicator, moving at a uniform speed on the surface of the substrate
4. After Spreader, check whether the wet film thickness meets the 70.9 micron requirement
Notice
• Make sure the coating applicator surface is clean and free of impurities before use
• Spreaders maintain uniform speed to avoid uneven thickness
• Clean the coating applicator after use to prevent Coating curing
• Select the appropriate diameter specification according to the experimental requirements
• Avoid collisions when storing and keep the coating applicator intact
