Overview
OSP-00/250 coating rod is a Spreader tool made by special cold extrusion process, which can realize 0 μm ultra-thin film Spreader. The product is made of 304 stainless steel, with a diameter of 10mm, a total length of 250mm, and an application width of 250mm. It is equipped with a continuous groove design, which is worry-free and easy to clean.
Features
1. Achieve 0 μm Ultra Thin Film Spreader
2. Manufactured by a special cold extrusion process
3. Continuous groove design, no worries about broken wires
4. Easy to clean
5. Easy film, reduce the force error, uniform force
6. Can be equipped with Spreader handle (to be purchased separately)
Principle
The OSP formed coating rod is processed into a structure with continuous grooves through a special cold extrusion process, and the coating is evenly distributed through the grooves during use to achieve accurate thin film Spreader.
Applications
Spreaders, laboratory films, surface preparation
Standards
Material meets 304 stainless steel standard
Steps
1. Spreader Substrate and Coatings
2. Coating evenly in the groove area of the coating rod
3. Spreader on the substrate surface with uniform force and speed
4. Clean the coating rod in time after completing the Spreader
Notice
• Spreader handle to be purchased separately
• Wash and keep clean in time after use
• Avoid scratching the surface of the coating rod with hard objects
• Pay attention to moisture and corrosion when storing
