Overview
The BANTE M852 6-in-1 STIP-scan is a multifunctional Portable inspection device that simultaneously measures six key water quality parameters: pH, conductivity (EC), total dissolved solids (TDS), salinity, dissolved oxygen (DO) and temperature. It integrates High Accuracy Sensor and intelligent compensation technology for rapid on-site testing and laboratory analysis.
Features
1. Integrated six key parameter measurement functions in one.
2. The pH unit adopts a circular sensitive membrane, supports 1-3 point calibrating, automatically recognizes USA/NIST buffer, and has automatic temperature compensation.
3. The EC unit adopts platinum Conductivity detector Electrode, supports 1-3 point calibrating, and has automatic temperature compensation and TDS coefficient customization functions.
4. The DO unit adopts Polarographic Electrode, supports 1-2 point calibrating, and has salinity, atmospheric pressure and automatic temperature compensation functions.
5. Equipped with automatic end point locking function, easy to read and record stable readings.
6. With automatic shutdown function to save power, and provide reset function to restore factory settings.
Principle
The meter senses specific ions or physical properties in the water sample through different dedicated Electrodes. pH Electrode senses hydrogen ion concentration through a sensitive Glass film; Conductivity detector Electrode calculates EC, TDS and salinity by measurement of the conductive ability of the solution; Dissolved Oxygen electrode Polarography measurement of oxygen content in water. All measurements are performed by signal processing with a built-in microprocessor, and readings are corrected using techniques such as automatic temperature compensation, and the results are finally displayed on the display screen.
Applications
Environment monitoring, aquaculture, wastewater treatment, drinking water analysis, agricultural irrigation, laboratory research, industrial process control
Standards
pH calibrated to support USA or NIST buffer standards
Steps
1. Turn it on and select the parameter mode to be measured.
2. Measurement parameters, calibrate with the corresponding standard solution (pH: 1-3 points; EC: 1-3 points; DO: 1-2 points).
3. Immerse the corresponding Electrode (pH Electrode, Conductivity detector Electrode or dissolved Oxygen electrode) into the water sample to be tested.
4. Wait for the reading to stabilize (automatic end point locking function can assist).
5. Record the measurement results on the display screen.
6. Clean Electrode after use and shut down or wait for automatic shutdown as needed.
Notice
• Please calibrate correctly according to the measurement items before use.
• The measurement of different parameters needs to use the corresponding special Electrode, please do not mix.
• Electrode sensitive parts are fully immersed in the solution when calibrating and using.
• The dissolved Oxygen electrode needs to ensure that the membrane cap is filled with electrolysis and the membrane is intact and nondestructive.
• The instrument has automatic temperature compensation, but still needs to avoid measurement or calibrating in extreme temperature environments.
• When not in use for a long time, please keep it properly according to Electrode maintenance requirements.
• When replacing the battery, please confirm the battery model (LR44) and quantity (9 pcs).
