Overview
OSP-150/400 is a Japanese OSP brand coating rod, specially designed for Spreader 150 micron thick wet-film. The product is made of 304 stainless steel, with a total length of 400mm and an application width of 300mm. It is manually operated by holding a space of 50mm at both ends, and has no handle design.
Features
1.The wet film thickness is accurate to 150 microns
2. Made of 304 stainless steel, with strong durability
3. formed production process to ensure uniform Spreader
4. Handle-free design, can be operated by holding both ends
5. Total length 400mm, application width up to 300mm
Principle
The OSP-150/400 coating rod is manufactured by a formed production process, and when used, the operator holds a space of 50mm at both ends of the rod, manually moves on the surface of the substrate, and uses the thread structure of the rod to uniformly Spreader a wet-film with a thickness of 150 microns.
Applications
Spreader process, surface preparation, laboratory research, industrial production
Standards
Japanese Industrial Standard
Steps
1. Spreader substrate
2. Hold the coating rod at both ends of each 50mm space
3. Place the coating rod on the surface of the substrate
4. Apply pressure evenly and move the coating rod
5. Complete 150 micron thickness Spreader
Notice
• Make sure the hand position is correct when operating
• Avoid excessive pressure affecting Spreader uniformity
• Clean and maintain in time after use
• Manual operation only, no electric function
• Pay attention to keep the surface of the coating rod clean
