Overview
HUXI LCD top-mounted Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts LCD display and self-locking chuck design, which is more high-end and safe than LED series. The product is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure laboratory safety.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Rotation speed 30-2200rpm, can be constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm
5. Configure Impeller penetration hole, no need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The LCD top-mounted Stirrer drives the Impeller swirl/spin with a brushless DC motor to mix solid-liquid, liquid-liquid or medium to high viscosity samples. With stepless speed regulation, the torque can be automatically adjusted according to the viscosity of the sample to ensure the mixing effect.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Choose the Right Impeller
2. Install Impeller into Self-locking Chuck
3. Rotation speed and Working time
4. Start the equipment for mixing operation
5. Turn off the device after the work is completed
Notice
• Before use, please check whether the Power supply voltage meets the requirements
• Do not exceed the maximum viscosity of 10000mPa · s during operation
• Ensure that the Ambient Temperature is within the range of 5~ 40 ° C
• The relative humidity should not exceed 80%
• Stop using it immediately when there is a fault alarm
Do not operate the equipment in a humid environment
• Regularly check the integrity of the chuck protective cover and non-slip pad
