Overview
LCD Stirrer is a high-end laboratory mixing equipment of HUXI brand, suitable for mixing medium and high viscosity liquids. The product adopts self-locking chuck and self-developed Cube lifting fixed clip, which can handle high load and long-term continuous work. It has automatic protection function for overload and abnormal conditions to ensure laboratory safety.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Rotation speed 30-2200rpm, can be constant Rotation speed, high and low speed controllable
3. DC brushless motor, long-term safe operation, outstanding performance
4. Overload and motor protection, automatically cut off the circuit and alarm in the event of overload, short circuit or abnormality
5. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod
6. The torque can be automatically adjusted according to the change of sample viscosity, which is convenient for experimental operation
7. Various Impellers and Bracket Options
Principle
The LCD top-mounted Stirrer drives the Impeller swirl/spin with a brushless DC motor to mix solid-liquid, liquid-liquid or medium to high viscosity samples. With stepless speed regulation, the torque can be automatically adjusted according to the viscosity of the sample to ensure the mixing effect.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the right Impeller and install it
2. Adjust the installation position of the stirring rod
3. Rotation speed and time parameters
4. Start Stirrer for mixing operations
5. Monitor operating status and fine-tune parameters if necessary
Notice
• Power supply voltage within 100-240VAC range before use
• Ambient Temperature should be between 5-40 ℃
• relative humidity should not exceed 80%
• The device will automatically stop and alarm when there is an overload or abnormality
• Do not use in samples exceeding the maximum viscosity of 10000mPa · s
• Collet clamping diameter range is 0.5-10 mm, please do not use beyond the range
• Regularly check whether the equipment Safety protection device is in good condition
