Overview
HUXI LCD top-mounted Stirrer (model RWD100/20030044/20030012) is a high-end laboratory equipment suitable for mixing medium and high viscosity liquids. The product adopts self-locking chuck and self-developed Cube lifting and fixing clip, which can handle high load and long-term continuous work. It has automatic protection function for overload and abnormal conditions to ensure laboratory safety. It is mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Rotation speed 30-2200rpm, can be constant Rotation speed, high and low speed controllable
3. DC brushless motor, long-term safe operation, outstanding performance
4. Overload and motor protection, automatically cut off the circuit and alarm in the event of overload, short circuit or abnormality
5. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod
6. The torque can be automatically adjusted according to the change of sample viscosity, which is convenient for experimental operation
7. Multiple Impellers and Bracket Available
Principle
The LCD top-mounted Stirrer drives the Impeller swirl/spin with a brushless DC motor to mix solid-liquid, liquid-liquid or medium to high viscosity samples. With stepless speed regulation, the torque can be automatically adjusted according to the viscosity of the sample to ensure stable operation under different viscosity conditions.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the appropriate Impeller and install it into the self-locking chuck
2. Adjust the installation position of the stirring rod without adjusting the overall height of the instrument
3. Rotation speed and time parameters set by LCD screen
4. Start the equipment and start the mixing operation
5. Working time can be fine-tuned as needed during the working process
Notice
• Power supply voltage within 100-240VAC range before use
• Ambient Temperature should be maintained between 5-40 ℃
• relative humidity should not exceed 80%
• Pay attention to the overload protection function, and deal with the fault display in time
• Use matching chuck protective cover and non-slip pad to ensure safety
• Select the appropriate Impeller type based on sample viscosity
• Regularly check the operating status of the equipment to ensure normal operation
