Overview
HUXI LCD overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts self-locking chuck and self-developed Cube lifting fixed clip design. The product is capable of high load and long-term continuous work. It has automatic protection function for overload and abnormal conditions to ensure laboratory safety. Mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Speed range 30-2200rpm, constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection functions, automatically cut off the circuit and alarm if there is an abnormality
5. Configure Impeller penetration hole, no need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The LCD top-mounted Stirrer drives the Impeller swirl/spin through a DC brushless motor to realize the mixing of solid-liquid, liquid-liquid or medium and high viscosity samples. With stepless speed regulation, the Rotation speed can be precisely controlled according to the experimental requirements, and the torque can automatically adapt to the change of sample viscosity to ensure the mixing effect.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the right Impeller and install it
2. Rotation speed and Working time set by LCD screen
3. Start the equipment and start stirring
4. Working time can be fine-tuned as needed during the working process
5. Turn off the device after the experiment
Notice
• Power supply voltage within 100-240VAC range before use
• Ambient Temperature should be maintained at 5-40 ℃
• The relative humidity should not exceed 80%
• Pay attention to the overload protection function of the equipment, and deal with abnormalities in time
• Use the appropriate Impeller type and specification
• Regularly check the integrity of the chuck protective cover and non-slip pad
