Overview
HUXI LCD overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. Models include RWD100/20030079/20030012. The product adopts self-locking chuck and self-developed Cube lifting fixing clip, which can be capable of high load and long-term continuous work. It has automatic protection function for overload and abnormal conditions to ensure laboratory safety. Mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LCD screen display, Rotation speed and time can be coarsely adjusted, Working time can be fine-tuned under working conditions
2. Speed range 30-2200rpm, constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm
5. Configure Impeller penetration hole, no need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The Stirrer drives the Impeller swirl/spin with a brushless DC motor to mix solid-liquid, liquid-liquid or medium to high viscosity samples. With stepless speed regulation, the torque can be automatically adjusted according to the viscosity change of the sample to ensure the mixing effect. In the event of overload, short circuit or abnormal situation, the system will automatically cut off the circuit and alarm to ensure the safety of the experiment.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the appropriate Impeller according to the sample characteristics
2. Impeller secured by self-locking chuck
3. Rotation speed and Working time
4. Start the equipment for mixing operation
5. Monitor the operating status and adjust parameters if necessary
Notice
• Before use, please check whether the Power supply voltage meets the requirements of 100-240VAC
• Ensure that the Ambient Temperature is within the range of 5-40 ° C and the relative humidity does not exceed 80%
• Impeller should be firmly fixed when installing
• Stop using immediately when there is an overload or fault alarm
• Regularly check whether the equipment protection function is normal
• Please pay attention to safety protection when using, avoid contact with swirling/spinning parts
