Overview
HUXI LCD top-mounted Stirrer (model RWD100/20030092/20030012) is a powerful basic stirrer suitable for mixing medium and high viscosity liquids. The product uses an LCD display screen, which is higher-end and safer than the LED series. It is equipped with a self-locking chuck and a self-developed Cube lifting fixed clip. It can handle high loads and long-term continuous work, and has an automatic protection function for overloads and abnormal situations to ensure laboratory safety.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions;
2. Speed range 30-2200rpm, constant Rotation speed, high and low speed controllable;
3. Adopt brushless DC motor for long-term safe operation.
4. Overload and motor protection, automatically cut off the circuit and alarm;
5. Configure Impeller penetration hole, no need to adjust the height of the instrument;
6. The torque is automatically adjusted according to the sample viscosity;
7. Multiple Impellers and Bracket Available.
Principle
The LCD top-mounted Stirrer drives the Impeller swirl/spin through a brushless DC motor to achieve mixing of medium and high viscosity liquids. The torque can be automatically adjusted according to the viscosity of the sample to ensure stable operation; Self-locking chuck and Cube lift fixing clip are used to simplify the installation process; Rotation speed and time are monitored in real time through the LCD screen during operation, and there is an automatic protection mechanism to cut off the circuit in case of overload or abnormality.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the appropriate Impeller and install it into the self-locking chuck;
2. Rotation speed and time parameters are set through the LCD screen;
3. Start Stirrer and fine-tune Working time as needed;
4. Monitor the operating status to ensure safety.
5. Turn off the equipment after mixing.
Notice
• Power supply voltage in the range of 100-240VAC;
• Ambient Temperature at 5~ 40 ℃, relative humidity does not exceed 80%;
• Avoid overload use and pay attention to the automatic protection function;
• Use chuck protective covers and non-slip pads to enhance safety;
• Regularly check Impeller and Motor status.
