Overview
HUXI LCD overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts self-locking chuck and self-developed Cube lifting fixed clip. The product is capable of high load and long-term continuous work. It has automatic protection function for overload and abnormal conditions to ensure laboratory safety. Mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Speed range 30-2200rpm, constant Rotation speed, high and low speed controllable
3. DC brushless motor, long-term safe operation, outstanding performance
4. Overload and motor protection, automatically cut off the circuit and alarm if there is an abnormal situation
5. Configure Impeller penetration hole, no need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the change of sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The LCD top-mounted Stirrer drives the Impeller swirl/spin through a DC brushless motor to realize the mixing of medium and high viscosity liquids. The Impeller is fixed with a self-locking chuck, and the Rotation speed parameters are displayed and controlled through the LCD screen. It has an automatic torque adjustment function and can automatically adapt to the change of sample viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Choose the Right Impeller Type and Specifications
2. Impeller fixed by self-locking chuck
3. Rotation speed and time parameters
4. Start the equipment for mixing operation
5. Monitor the operating status and adjust parameters if necessary
Notice
• Before use, please confirm that the Power supply voltage meets the requirements (100-240VAC)
• Ambient Temperature should be in the range of 5-40 ℃
• The relative humidity should not exceed 80%
• Pay attention to the overload protection function, the device will automatically stop when there is an abnormality
N • Select the appropriate Impeller type to suit different viscosity samples
• Regularly check the integrity of the chuck protective cover and non-slip pad
