Overview
HUXI LCD overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The model is RWD150/20030079/20030012. The product adopts self-locking chuck and self-developed Cube lifting fixed clip, which can be capable of high load and long time continuous work. It has automatic protection function of overload and abnormal situation to ensure laboratory safety. Mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LCD screen display, Rotation speed and time can be coarsely adjusted, Working time can be fine-tuned under working conditions
2. Speed range 30-2200rpm, constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm
5. Configure Impeller penetration hole, no need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The Stirrer drives the Impeller swirl/spin through a brushless DC motor to achieve mixing of medium and high viscosity liquids. With stepless speed regulation, the torque can be automatically adjusted according to the change of sample viscosity to ensure the mixing effect. In the event of overload, short circuit or abnormal situation, the system will automatically cut off the circuit and alarm to ensure the safety of the experiment.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the right Impeller and install it
2. Connect the power supply and turn on the device.
3. Rotation speed and Working time set by LCD screen
4. Can be coarse and fine-tuned as required
Step 5 Start the mixing operation
6. Turn off the device after the experiment
Notice
• Before use, please check whether the Power supply voltage meets the requirements
• Make sure the Impeller is securely installed
• Note that Ambient Temperature should be in the range of 5-40 ° C
• relative humidity should not exceed 80%
• The device will automatically stop when there is an overload or abnormality, please check the reason.
• Do not use under conditions exceeding the maximum viscosity of 80000mPa · s
• Regularly check whether the equipment protection function is normal
