Overview
HUXI LCD top-mounted Stirrer (model RWD150/20030031/20030012) is a laboratory equipment suitable for mixing medium and high viscosity liquids, which is more high-end and safer than the LED series. It adopts self-locking chuck and self-developed Cube lifting and fixing clip for solid-liquid, liquid-liquid or medium and high viscosity sample mixing. It can handle high load and long-term continuous work, and has automatic protection function for overload and abnormal conditions.
Features
1. LCD screen display, Rotation speed and time can be coarsely adjusted, Working time can be fine-tuned under working conditions
2. Speed range 30-2200rpm, constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm
5. Configure Impeller penetration hole, no need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The Impeller swirl/spin is driven by a brushless DC motor to generate tangential, axial or radial flow, forming turbulence and shear force to achieve liquid mixing. The torque can be automatically adjusted according to the viscosity to ensure stable operation under different viscosity conditions.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the appropriate Impeller and install to the self-locking chuck
2. Rotation speed and Working time set by LCD screen
3. Roughly adjust or fine-tune parameters as required
4. Start the equipment for mixing operation
5. Turn off the power after completing the work
Notice
• Only for Permissible Ambient Temperature 5~ 40 ℃ and relative humidity below 80%
• Power supply voltage within 100-240VAC range before use
• Pay attention to the safety of the chuck protective cover and non-slip pad
• The device will automatically stop and alarm when there is an overload or abnormality
• Impeller selection depends on sample viscosity and container characteristics
