Overview
The HJQ-2 pneumatic Stirrer is a power device that uses a good pneumatic motor to use compressed air as the driving force of the working medium, uses the expansion of compressed gas to convert pressure energy into mechanical energy, so as to realize the stirring and mixing of samples in the experimental environment, etc., especially suitable for stirring paints, chemicals, solvents, etc. with flammable and explosive substances or high temperature environments.
Features
1. Small Size, High Power, Safe and Light Operation
2. With high rotational torque, it can be started with load
3. Standard pressure gauge, you can check the pressure value at any time
4. Imported self-locking chuck with self-locking function, high concentricity and long service life
5. Cube lifting fixed clip adopts double hole mode, the height can be adjusted arbitrarily, the clamping is stable, and the operation is more stable
6. The whole machine adopts explosion-proof, no spark, no static electricity good pneumatic motor, safe operation, not easily affected by external environmental factors
7. Impellers of various specifications are available
Principle
Using a good pneumatic motor with compressed air as the driving force of the working medium, using the expansion of compressed gas, the pressure can be converted into mechanical energy of the power device, so as to achieve the mixing of samples in the experimental environment.
Applications
Mixing of flammable and explosive substances, stirring in high temperature environment, stirring of paints, stirring of chemicals, stirring of solvents
Steps
1. Select the Impeller Specifications
2. Install Impeller to Self-locking Chuck
3. Adjust the height of the Cube lifting fixing clip
4. Connect the compressed air source
5. Check the pressure value through the pressure gauge
6. Start Stirrer for stirring operation
Notice
• Only suitable for use within the Permissible Ambient Temperature range of 5~ 40 ° C
• The relative humidity should not exceed 80%
• Maximum viscosity must not exceed 5000cp
• Ventilation pressure range from 0 to 6 bar
• Suitable for batch processing
• Select the appropriate Impeller type based on the media characteristics
